Scanner

Scanner

Monday, 4 January 2016

Uniden UBC126AT Key Press Codes



Press and hold these keys while turning on the UBC126AT.

2 + 9 + Hold = Factory Reset
1 = Country Mode Australia
2= Country Mode New Zealand
Hold + 3 = Set Contrast
Hold + 4 = Frequency counter mode (Use rotary knob to change bands)
Hold + 5 = USB PORT TEST
Hold + 6 = Key / screen test - shows on the screen which keys are pressed.
Hold + 7 = Load Test Data - search bank 6
Hold + 8 = Load Test Data - search bank 6
Hold + 9 = Load Test Data - search bank 9
Scan + 1 = Frequency counter mode (Use rotary knob to change bands)
Srch + 1 = Load Test Data - search bank 6
Scan + 3 = Key / screen test - shows on the screen which keys are pressed.
Scan + 4 = Load Test Data - search bank 1
Scan + 7 = Load Test Data - search bank 7
Scan + 8 = Load Test Data - search bank 7
Scan + 9 = Load Test Data - search bank 0
Scan + 0 = Load Test Data - CH401 - 404 / Adjust Voltage
Srch + any number key = Load Test Data
L/O + 5 = Load test Data - search bank 1
L/O + 6 = Turn on LCD backlight (remove batteries to turn off)
L/O + 7 = Load test Data - scan bank 1
L/O + 8 = Load test Data - scan bank 1
E + 1 = Factory Reset / Country Mode Australia
E + 2 = Factory Reset / Country Mode New Zealand

2 comments:

  1. anybody know how i can get my uniden ubc126at scanner up and going so i can pick up nz police frequincies?

    ReplyDelete
    Replies
    1. Try these pages for the frequencies, if you can let me know what ones are for the area's the closest to you I could build you a config file:

      https://www.john.geek.nz/scannerfreq/Frequencies/

      http://www.radiowiki.org.nz/index.php/Main_Page

      Delete